Turning off the boiler completely is not always the right answer when leaving home in winter. Some individual-heating gas boilers require the power to remain connected for their freeze-prevention function to operate, and the way away mode works varies by manufacturer and model. A short absence and a longer absence of 2–3 days or more should not be managed in exactly the same way.
For a One-Day Absence, First Check Whether Lowering the Normal Heating Setting Is Better Than Away Mode
If you will be away from home for a relatively short period, such as going to work or running errands, it is better to check the heating settings of your current boiler rather than automatically pressing the away-mode button. Because the way away mode reduces heating varies by model, it is difficult to apply a single rule such as “turn on away mode after a certain number of hours” to every boiler.
In particular, you should not assume that pressing the away button completely turns off the heating. Some KD Navien controllers operate only hot-water and freeze-prevention functions when away mode is selected, while the Rinnai R331N is designed to repeat minimum heating or start heating at a set time before you return.
Therefore, for a short absence, the most important thing is to first check exactly what your boiler's away function actually does.
If You Will Be Away for 2–3 Days or More, Do Not Turn Off the Power First
Be careful about managing a boiler by unplugging it simply because you will be away from home for several days in winter. KD Navien advises users to check that the power remains connected because the freeze-prevention device built into the product operates electrically, while Rinnai also explains that its freeze-prevention operation works when the power remains connected.
Freeze prevention has a different purpose from heating operation for reducing heating costs. When temperatures fall, the boiler may operate its pump or burner, depending on the product, to protect the boiler and pipes. The Rinnai R331N manual also explains that the pump may operate automatically or the burner may ignite to prevent freezing in winter.
For this reason, during a longer winter absence, checking the manufacturer's recommended away and freeze-prevention settings and the condition of the valves should come before cutting off the power.
KD Navien and Rinnai Do Not Have the Same Away-Mode Functions
The differences between manufacturers show why it is difficult to simplify the advice into a rule such as “turn on away mode after X hours.”
| Model or category | Confirmed operating method |
|---|---|
| KD Navien NR-60DS | When away mode is selected, hot-water and freeze-prevention functions operate |
| Rinnai R331N | Depending on the away setting, minimum heating is repeated or heating starts after the set time |
| Common point | The power needs to remain connected for winter freeze prevention |
The KD Navien NR-60DS quick user manual explains that away mode can be used when no one is at home and that hot-water and freeze-prevention functions operate while away mode is selected.
By contrast, on the Rinnai R331N, pressing the away button once repeats minimum heating at four-hour intervals. Additional button presses allow settings such as 6, 8, or 12 hours, and there is also a mode in which heating starts after the set period has elapsed.
In other words, even when products use the same name, “away mode,” their actual operating methods may differ by model.
Some Rinnai Models Allow You to Set the Away Period Directly
The away function on the Rinnai R331N is not simply a function that stops the boiler. Pressing the away button once repeats minimum heating, while additional button presses allow settings in 6-, 8-, or 12-hour intervals, after which heating automatically starts when the set period ends.
Therefore, even among Rinnai products, operation can differ by model. You should check both the away time displayed on the controller and the user manual.
Rather than assuming that “away mode completely turns off the heating,” the accurate approach is to check what operating command the away button actually activates on your specific product.
In Winter, Also Check the Gas Valve and Exposed Pipes
Do not simply switch the boiler controller to away mode and consider the job finished. KD Navien advises users not to shut off the gas valve even when leaving home for around 2–3 days in winter, and recommends wrapping exposed cold-water and hot-water pipes with insulation.
Rinnai likewise advises keeping the individual-room valves and gas intermediate valve open when leaving home for 2–3 days or longer in winter without heating, and recommends protecting exposed pipes with insulation.
If the boiler is installed in a location exposed to cold weather, such as outdoors or on a balcony, the condition of the pipes should be checked separately. KD Navien's manual notes that additional measures may be necessary if the temperature at the boiler installation site falls below 0°C.
For a Long Winter Absence, Check the Boiler Manual's Freeze-Prevention Conditions Rather Than Relying Only on Away Mode
A situation in which a home will not be used for an extended period should be distinguished from an ordinary absence. KD Navien's manual provides a separate procedure for cases in which the product will not be used for a long period, including shutting off the power, gas, and cold-water supply and draining the water inside the boiler. This is different from simply pressing the away button before an ordinary winter trip or business trip.
Therefore, you should not decide based only on a period such as “it is okay to turn off the power if I am away for a week.” You need to distinguish between simply being away from home and actually storing the boiler for an extended period in a way that requires the water inside the boiler to be drained.
Check These Things Before Leaving Home
Before leaving home in winter, the following sequence makes the decision easier.
1. Check whether the home uses an individual-heating gas boiler.
2. Check the boiler model number.
3. Check the user manual to see what functions operate when the away button is pressed.
4. In winter, check that the power plug remains connected.
5. Check that the gas valve and individual-room valves have not been closed arbitrarily.
6. Check the insulation condition of exposed heating, water-supply, and hot-water pipes.
7. If the boiler will not be used for an extended period, check whether a separate storage procedure is required rather than the normal away setting.
Ultimately, winter boiler away settings should not be determined by a single number such as “how many hours until away mode.” The appropriate approach is to consider the length of the absence + the boiler model + the actual operation of its away function + its freeze-prevention conditions together.
In particular, completely cutting off the power may prevent the freeze-prevention function from operating. In winter, it is therefore safer to check the product manual's instructions concerning power, valves, and pipes first.
Additional Check
If you are starting the boiler for the first time during winter, the exhaust flue and ventilation openings should also be checked separately. Away settings and freeze prevention are not only matters of heating costs; they are also part of safely managing the boiler and its pipes in winter conditions.







